Advertisement
Quick Links
Please adjust the C of G (200-212mm) according to
the diagram before you attempt to fly the wing. If you
do not follow the C of G closely, it will crash or
damage to nearby properties or people at your flying
field.
The flight performance will be affected by adding
extra weight on the Teksumo. So you should reduce
any unnecessary weight while assembly. Then you'll
get the best flying performance!
Recommended Flying Setup
Max servo travel of aileron: 15 degrees up and
15 degrees down (28mm)
Max servo travel of elevator: 15 degrees up and 15
degrees down (28mm)
Do not fly under the conditions as below :
Wind strong enough to make the trees rustle
A street with many trees or street lamps
Close to high voltage electrical wires
High Population density areas .
Cautions for flying
Large gyms, front lawns and parks make excellent
flying areas. Make sure you have permission to fly
and follow safety guidelines set by local authorities.
The calmer the wind, the better!
Note for Storage
Please disconnect the lipo packs when finished flying.
Do not press or crush the airplane when storing .
The best way to store is to hang the airplane to keep
the control surface rigid .
INSTRUCTION MANUAL
Features:
1. Teksumo is a very popular EPP high speed delta wing
for FPV flying. It is most suitable to fly in a large open
field.
2. Made of high quality EPP material, it is very strong,
durable and easy to fly.
3. Very easy to build, most of the parts are pre-assem-
bled in our factory already.
Product Specifications
Fuselage length: 575mm (22.6in .)
Wingspan: 900mm (35.4in .)
Flying Weight: 500-550g (with battery)
Motor: 2208 KV 1370 or Hk2818 KV1350 (Recommend)
ESC : 15-20 Amp (Recommend)
Propeller: 7050E OR 6050E (Recommend)
Servo: 8g micro servo* 2pcs (Recommend)
Radio: 4 or more channels with computer mixing (Rec-
ommend)
Battery: 11.1 V 800-1200mAh Li-po 20C (Recommend)
1
14
6
2
10
13
3
Parts included in the packing
1. Wing (right and left)
2. Wing fences
3. EPP skid
4. Z bend pushrods
5. Control Horns
6. Servo mounts
7. Carbon rods
8. Zip ties
9. Motor mount
10. Push rod connector
11. Battery velcro strap
12. Fiberglass tape
13. Carbon composite board for Video Camera
(Video camera is not included)
14. Battery tray
1
12
4
7
11
5
8
9
2 pcs
2 pcs
1 pc
2 pcs
2 pcs
2 pcs
3 pcs
4 pcs
1 pc
2 pcs
1 pc
1 pc
1pc
1pc
Advertisement
Related Manuals for H-KING Teksumo
Summary of Contents for H-KING Teksumo
-
Page 1: Instruction Manual
INSTRUCTION MANUAL Features: 1. Teksumo is a very popular EPP high speed delta wing for FPV flying. It is most suitable to fly in a large open field. 2. Made of high quality EPP material, it is very strong, durable and easy to fly. - Page 2 The items below are required for assembly 3. Please ensure the motor mount is true and levelled with the plane axis. The motor thrust angle should be aligned to the wing axis otherwise it will affect the flying performance. Once satisfied about the fit, apply CA glue to secure it in place.
- Page 3 10. Use a pliers to cut off the excess and use a file to 7. Apply CA glue to the servo mount and secure it into round off the edges. place as shown. Install servo onto the servo mount. Use two self-tapping screws to secure the servo into place.
- Page 4 The flight performance will be affected by adding extra 16. Install the fins on both wing tip and secure it with weight on the Teksumo. So you should reduce any CA glue. unnecessary weight while assembly. Then you’ll get the...