H-KING NE-1 NAVY GUB Instruction Manual page 17

section 17 : PILOT SEATS
Fit and glue into place the rudder
closed loop exit fairings.
CA
section 18 : AILERON SERVO & LINKAGE
X
Extension
cord not include.
BOTTOM - VIEW / Unteransicht
Control horn
......................2
2x30mm screw
...................6
Connector
...............2
Fit the aileron servos to the
servo covers as shown in the
diagram (also see next page).
Connect a servo extension
lead to the servo and feed
through the wing. Secure the
cover to the wing using 4 off 2
x 10mm screws.
If using a throttle servo them make up the
throttle pushrod from the servo to the carburetor
throttle lever. Fit the 2 pilots seats into the slots
inside the fuselage.
2x10mm
1.5mm
screw
16
Aileron servo
Servo mount
Aileron servo hatch
WING BOTTOM