Setting The Name - Northern Telecom Compact ICS 4.0 Manual

'
≠
9. Press
10. Press
CHANGE
11. Press
®
12. Enter the new overflow position.
13. Press

Setting the name

This setting allows you to program the Hunt Group name, such
as SERVICE or SALES. The name can be up to seven
characters in length.
1. Place the programming overlay on any M7310 or M7324
ƒ••¤flfl‹››
telephone.
2. Press
¤‹fl›fl
The display shows
3. Press
Terminals&Sets
'
4. Press
prgrming
≠
≠
5. Press
6. Press
≠
7. Enter the Hunt Group number you want to program (1-6).
'
8. Press
9. Press
CHANGE
10. Press
'
11. Using the dialpad, enter the name of the Hunt Group.
®
12. Press
13. Press
P0881596 Issue 02
. The display shows
. The display shows
to change the overflow position.
'
to exit or
Password:
(ADMIN). The display shows
.
until the display shows
.
. The display shows
. The display shows
. The display shows
. The display shows
.
'
to store the name.
to exit or
Programming Hunt Groups / 157
Overflow:
Overflow:HGn
to continue programming.
(CONFIG).
.
System
Hunt groups
Show group
Member DNs:
Name:
.
to continue programming.
Compact ICS 4.0 System Coordinator Guide
.
.
.
.
.