Troubleshooting for the device attached to the I-ATA
Check the following before you call a repair person:
•
Check to see that the data parameters (for example, Parity
or Baud Rate) are set correctly.
˚•°‚·
•
Ensure that tones are turned off for the I-ATA using
•
Make sure you are dialling out on an intercom or external
line. Use
Contact your installer or customer service representative to
change the prime line for the telephone or device.
•
Substitute a single-line telephone for your data
communication device. If you receive a dial tone on the
single-line telephone, the problem might be with the data
communication device.
P0881596 Issue 02
.
˚¤
to choose an alternate line.
Telephone features / 171
Compact ICS 4.0 System Coordinator Guide