Changing The Direct-Dial Telephone Assignments - Northern Telecom Compact ICS 4.0 Manual

You cannot forward calls to a direct-dial telephone that is
outside your Norstar system. See ''Making changes to Call
Forward No Answer'' on page 21.
Note: ISDN terminals cannot use the Direct-Dial digit to
reach a Direct-Dial set.

Changing the direct-dial telephone assignments

Your installer or customer service representative sets up the
direct-dial telephone.
You can change which direct-dial telephone a telephone is
assigned to, or assign it no direct-dial telephone.
You need the programming template found at the front of this
guide. See ''Getting started with Norstar'' on page 1 for more
information.
ƒ••¤flfl‹››
¤‹fl›fl
1. Press
2. Press
≠
password).
3. Press
4. Enter the internal number of the telephone you want to
program and press
Capabilities
≠
'
5. Press
6. Press
CHANGE
7. Press
P0881596 Issue 02
(the default System Coordinator
Terminals&Sets
at
≠
.
.
until the display reads
to select either
Using System features / 191
.
.
. The display reads
D-Dial
Set1 None
or .
Compact ICS 4.0 System Coordinator Guide
.