Programming A Memory Button With A Line Pool Feature Code; Making Calls From An Isdn Terminal; Changing How You Dial Your Calls - Northern Telecom Compact ICS 4.0 Manual

Tip -
use Ring Again at the busy tone. You are notified when
a line in the line pool becomes available. See ''Using
Ring Again'' on page 59.

Programming a memory button with a line pool feature code

When you program a button with the line pool feature code,
you must enter a line pool access code after the feature code.
The programmed line pool button accesses a specific line pool,
not the line pool feature. See ''Programming feature buttons''
on page 129 for more information.
If you program a button with an indicator to access a line pool,
when all the lines in a line pool are busy, the indicator for the
line pool button turns on. The indicator turns off when a line
becomes available.

Making calls from an ISDN terminal

ISDN terminals do not have line keys or intercom keys as do
Norstar telephones. To make an outgoing call from an ISDN
terminal, access an external line by entering a line pool code
or by using the ARS feature.

Changing how you dial your calls

ƒ•°¤
£
1. Press
˙
2. Press
3. Press
mode.
The dialing modes feature code cannot be programmed onto a
memory button.
P0881596 Issue 02
If no lines are available in the line pool, you can
NEXT
or until the dialing mode you want appears.
OK
or to select the displayed dialing
ƒ•°¤
.
Compact ICS 4.0 System Coordinator Guide
Making calls / 55