Changing A Handsfree To A Regular Call; Using Handsfree - Northern Telecom Compact ICS 4.0 Manual

Changing a handsfree to a regular call

Lift the receiver.

Using Handsfree

The indicator next to
Handsfree turned on. It flashes when you mute the
microphone.
Wait for your caller to finish speaking before you speak. The
microphone and speaker cannot both be on at once. Your
caller's voice may be cut off if you both speak at the same time.
Noises such as a tapping pencil could be loud enough to turn
on your microphone and cut off your caller's speech.
To prevent a possible echo, keep the area around your
telephone free of paper and other objects that might screen
your microphone. Turning down the microphone's volume
(press the left end of
echoes. When you change the volume level, both the
microphone and speaker volume are adjusted to prevent
feedback problems.
Place the telephone so that any unavoidable local noise (such
as an air conditioner) is behind it. This limits the amount of
disruptive background noise.
Tip -
when handsfree communication is not necessary or
when you need privacy during a call. Another option is to
use a headset.
P0881596 Issue 02
©
√
In open-concept environments, use the receiver
Answering calls / 45
is solid when you have
while speaking) prevents
Compact ICS 4.0 System Coordinator Guide