Setting The Date And Time; Setting The Display Contrast - Northern Telecom M5317TX Installation Manual

Setting the date and time

Each time the M5317TX is powered up, the clock and calendar must be
updated as explained in the following procedure:
1. Press Setup.
Select update item
Lang
If Clock is not shown, press more... until it is displayed.
2. Press Clock. The following is shown on your display.
Set date and time:
Day
3. Press the softkey for the setting you wish to change.
4. When you have displayed the desired time and date, press OK.
5. Press Exit.

Setting the display contrast

1. Press Setup.
Select update item
Lang
2. Press more... until the Contrst option is displayed.
3. Press Contrst.
4. Press either end of √ to adjust the display contrast.
5. Press OK, then press Exit.
Data Clock
Month Hour
Data Clock
M5317TX and CustomNet Installation Guide
Customizing the M5317TX
Volume more
1 JAN 00:00am
Minute OK
Volume more
Use vol control [][][][][][][][]
OK
41