Programming Or Changing Ccr Destinations; Testing Your Custom System Answer And Ccr - Northern Telecom Compact ICS 4.0 Manual

76 / Auto Attendant
Tip -
press
programming destinations for CCR.
ƒ•°‹‹

Programming or changing CCR destinations

1. Press
¤‹fl›fl
Coordinator password (the default password is
NEXT
2. Press
SHOW, EXIT,
≠
are
3. Press
current destination when the caller presses zero. Your
choices are
CHNGE
4. Press
Each number from zero to nine and
attendant telephone or one of the nine CCR groups. The
can be set up to make the system play the CCR greeting again
Repeat
( ). If a digit is set to
NEXT
Using
remaining digits.

Testing your custom System Answer and CCR

If you have more than one external line, you can call in to hear
your greetings by dialing the number used by external callers
to call the attendant set or a line that is answered using CCR.
To call systems with only one external line, you must go to a
telephone that is not connected to your system.
Compact ICS 4.0 System Coordinator Guide
If you have recorded your greetings, you can
NEXT
from the display showing
Auto att grtngs
).
until the display shows
PREV
and
. The display shows
CHNGE
and
to select the appropriate destination.
CHNGE
and , select the destinations for the
and go right into the menu for
and enter the System
CCR tree
.
Dial 0:
NEXT.
•
can direct a call to the
None
, it has no destination.
. The choices
and the
•
P0881596 Issue 02