Northern Telecom Compact ICS 4.0 Manual page 142

130 / Customizing your telephone
Displays
<Feature name>
SHOW
Enter code:
F__
QUIT
Feature code:
QUIT
Feature moved
Press a button
EXIT
Program and HOLD
Program and OK
QUIT
For other displays, see ''Common feature displays'' on page 215.
Compact ICS 4.0 System Coordinator Guide
The name of the feature assigned to a button
OK
is displayed when you press the button.
appears when there is more information
available. Press
information.
If you are checking a speed dial button, enter
the two-digit speed dial code that you want to
check.
Enter the feature code, or press
CLEAR
to quit programming or
numbers you have entered. The system
accepts the entry as soon as you enter a
valid feature code.
Press
you want to assign to the button. You cannot
enter invalid codes.
You have programmed a button with a
feature that was already programmed onto
another button. The feature has moved to
the button you just programmed. Its original
button is now blank.
ƒ
Press the button you want to check. Press
Enter the number you want to program and
press
press
Enter the number you want to program and
˙
OK
press
£
SHOW
or
CLEAR
ƒ
and enter the feature code
EXIT
or when you are finished.
˙
˙
. To erase the button, just
.
OK
. To erase the button, just press
OK
or .
SHOW
for additional
®
QUIT
or
to clear the
P0881596 Issue 02