Northern Telecom Compact ICS 4.0 Manual page 205

You need the programming template found at the front of this
guide. See ''Getting started with Norstar'' on page 1 for more
information.
ƒ••¤flfl‹››
¤‹fl›fl
1. Press
2. Press
≠
password).
3. Press
4. Enter the internal number of the telephone you want to
program and press
Capabilities
≠
'
5. Press
6. Press
CHANGE
7. Press
None, Intrnl
Internal assigns an internal number.
External assigns an external number. If you select an external
number, you can select the line on which the call is made: the
prime line, an external line, a line in a line pool, or a line
selected by the routing table. If you select a line pool, you have
to specify the line pool access code. If you select the routing
table, the number dialed is treated as a destination code and is
routed according to the routing tables.
A telephone's prime line, line pool access codes, and access to
a line pool can be programmed by your installer or customer
service representative.
P0881596 Issue 02
(the default System Coordinator
Terminals&Sets
at
≠
.
.
until the display reads
to select the type of call the hotline makes:
Extrnl
, or .
Using System features / 193
.
.
. The display reads
Hotline
Compact ICS 4.0 System Coordinator Guide
.