Turning Services On And Off - Northern Telecom Compact ICS 4.0 Manual

182 / Using System features

Turning Services on and off

The master control for how different services and their
schedules are used by your system is in programming. There
are three settings: Manual, Automatic and Off.
• Manual allows you to turn the service on and off at any
time from a control telephone using a feature code.
• Automatic allows you to use the preassigned stop and start
time for a service. You are able to start and stop the service
by entering the appropriate feature code at a control
telephone. If you select this setting, you use the start and
stop times programmed by your installer or customer
service representative.
• Off prevents the service from being activated.
You need the programming template found at the front of this
guide. See ''Getting started with Norstar'' on page 1 for more
information.
ƒ••¤flfl‹››
¤‹fl›fl
1. Press
2. Press
'
password).
≠
3. Press
'
4. Press
5. Press
≠
program.
6. Press
≠
schedule you want to program.
7. Press
works best for your office:
Compact ICS 4.0 System Coordinator Guide
(the default System Coordinator
twice.
Services
at .
until you see the Service you want to
'
and
CHANGE
and use
Off Manual
,
.
until you see the
to select the setting that
Automatic
or
P0881596 Issue 02
.