A Map For Working In Programming - Northern Telecom Compact ICS 4.0 Manual

Programming buttons are active or inactive at different stages of
programming. A button is active (meaning you can use that
option), when the indicator next to it is lit (

A map for working in programming

The programming maps on page 9 and page 10 show the
ƒ••Ç؈ÏÈÌ
headings you'll see when you move through the display menu
after pressing
¤‹fl›fl
the password (the default password is
). The maps show you the choices under each
menu heading.
A Basic password can be used with a limited number of feature
codes, including
call services on and off. For more information, see ''Using
passwords'' on page 187.
Terminals&Sets
Lines
Services
Sys speed dial
P0881596 Issue 02
••ÊȘ‰
Terminals and sets - Customize the many features
used by telephones. You can change where a call is
forwarded, give a telephone a name, or allow certain
features to be used at a telephone. You can change
the button programming on any telephone on the
system.
Lines - Program names for each line.
Services - Turn services on or off. These are Ringing
service, (often called night service) that allows
additional telephones to ring, Restriction service that
blocks certain kinds of calls and Routing Service that
decides what lines a call uses.
System speed dial - Program up to 70 different
telephone numbers so that people in your office can
dial them with a two-digit code.
Getting started with Norstar / 7
ª º
or ).
ÅΘȈ
and entering
and the codes for turning
Compact ICS 4.0 System Coordinator Guide
or