Common Feature Displays - Northern Telecom Compact ICS 4.0 Manual

Common feature displays

You may see the following displays when you use a feature.
Access denied
Denied in admin
Feature timeout
Inactive feature
Invalid code
Not available
Set locked
1234567890123...
VIEW‚
§
39>21
P0881596 Issue 02
Someone is already using programming, or
the feature you are trying to use is not
compatible with the configuration of the
telephone or line.
You have tried to use a feature, but you have
not been given access to it in administration
programming.
You have taken more than 15 seconds to
press a button in response to a display.
You have entered a feature code that is used
by an application program that your system
does not have.
You have entered an invalid feature code.
You have tried to use a feature that is not
available in the present setup of your Norstar
system.
You cannot use the feature you have chosen
because your telephone is locked. See
''Using Set lock'' on page 194.
£
Press or press
˙
OK
number that is too long to fit on the display.
Press
finished.
This indicates a long distance call. (May be
available with Call Display services.)
Either you are receiving an internal call from
telephone 39 forwarded by telephone 21 or
you have an Answer button for telephone 21
and an internal call from 39 is ringing on 21.
VIEW‚ ·VIEW t
or o view a
OK
or when you are
Compact ICS 4.0 System Coordinator Guide