Making Calls - Northern Telecom Compact ICS 4.0 Manual

Making calls

There are many ways to make a call, depending on the
programming and the type of call, as follows:
• Pick up the receiver and dial. The Norstar system supports
three methods of dialing. See ''Changing how you dial
your calls'' on page 55.
• Pick up the receiver, press a line button, and dial (if the call
©
is not on your prime line).
• Press
©
receiver). See ''Using Handsfree/Mute'' on page 43.
• Press
without the receiver and if the call is not on your prime
line).
• Press a line button and dial (to talk without the receiver and
if Automatic Handsfree is assigned to your telephone).
• Use one of the features that make dialing easier. See
''Time savers for making calls'' on page 77.
Displays
21 busy
PRIORITY
9__
QUIT BKSP
95551234
P0881596 Issue 02
and dial (to talk without using the
, press a line button, and dial (to talk
The telephone you have called has no
LATER
internal lines available. Press
the Ring Again or Message features or press
PRIORITY
You are dialing using Pre-Dial. To erase an
√
incorrect digit, press the left end of
complete, select a line or lift the receiver.
This prompt remains on your display as long
TRANSFER
as you are on a call you have dialed. To
transfer the call, press
to make a priority call.
BKSP
or . When the number is
TRANSFER
Compact ICS 4.0 System Coordinator Guide
LATER
to use
.