Northern Telecom Compact ICS 4.0 Manual page 181

Saved
Number
Redial
System
Speed Dial
Timed
Release
Transfer
Trunk Answer
P0881596 Issue 02
Reply to a Ring Again signal
To connect with a Ring Again request when you are on
˚¤
a call (or your telephone is off-hook):
• Enter
your call on hold.
˚ ¤
• To return to the caller on hold, enter
To connect with a ring again request when your
telephone is on-hook:
• Lift the handset. The Ring Again number is
automatically redialed.
If you do not respond to the Ring Again signal within 30
seconds, Ring Again is canceled.
˚•fl‡
Allows you to save an external number while you are on
a call or while the called telephone is ringing. To
˚•fl‡
automatically redial the saved number:
• Enter
˚•‚
<plus the speed dial code>
Allows you to use a speed dial code to quickly dial
preprogrammed telephone numbers. See ''Using
Speed Dial'' on page 81 for more information.
You cannot program personal speed dial numbers for
the telephone connected to the I-ATA.
˚•‡¤
Generates a longer Link signal. Use this feature when
you want to release a call from your line but retain the
use of the line for another call.
Allows you to transfer a call. To transfer a call you must
˚•‡‚
have an available intercom line.
• Enter
• Enter the transfer destination number.
• Replace the handset.
˚¤
To Transfer using Conference
• Enter
˚•‹
• Make the second call.
• Enter
• Replace the handset.
˚•°‚‚
Allows you to pick up a ringing external call on a line for
which Ringing Service is turned on.
Telephone features / 169
. This automatically places
.
.
.
.
.
Compact ICS 4.0 System Coordinator Guide