Northern Telecom Compact ICS 4.0 Manual page 29

01:nnnnnnnn__
CANCL BKSP
Select a line for the speed dial code
01:nnnnnnnn
CLR CHANGE
Use prime line
CHANGE
CHANGE
Stop pressing
Use prime line
CHANGE
If you assign a specific line to a system speed dial number, only telephones with
an appearance of that line can use the speed dial number.
Choose what shows up on the display
Use prime line
CHANGE
Display digits:Y
CHANGE
Display digits:N
CHANGE
Program a name for a speed dial
The system has a standard name to display, so it is not necessary for you to
program one. However, if you have chosen not to display the telephone number,
you may want a specific name.
Display digits:N
CHANGE
P0881596 Issue 02
Frequently used programming operations / 17
Your display shows the telephone number, and not
OK
n's as shown here. Press
'
Press
CHANGE
Press to see your options:
specific line (for example
Pool code:71
(for example
when the display shows the prime line again.
In this example, the system selects the prime line
automatically (the most common choice), to dial
speed dial code 01.
'
Press
Your choices are Yes and No. Yes means the display
shows the telephone number. Press
No means the display shows a name for the code.
'
Press
OK
.
.
Use prime line
Use line: 01
Use routing tbl
), or
.
.
Compact ICS 4.0 System Coordinator Guide
, a
), a line pool
.
CHANGE
.