190 / Using System features
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can
clear it in programming. The individual can then enter a new
password from his or her telephone.
You need the programming template found at the front of this
guide. See ''Getting started with Norstar'' on page 1 for more
information.
ƒ••¤flfl‹››
¤‹fl›fl
1. Press
2. Press
'
password).
≠
3. Press
'
4. Press
≠
5. Press
6. Press
of the telephone where you want to clear the Call Log
≠
password.
7. Press
Using special telephones
Direct-dial
You can reach the direct-dial telephone by dialing a single
digit. The direct-dial telephone is usually in a central location,
such as a attendant's desk. It is usually the prime telephone or
the central answering position (CAP).
The direct-dial telephone can send up to 30 messages and can
invoke Services to activate the extra-dial telephone.
Compact ICS 4.0 System Coordinator Guide
(the default System Coordinator
four times.
Passwords
at
.
until the display reads
and enter the internal telephone number
CLR
, then press
.
Call log pswds
to clear the password.
P0881596 Issue 02
.
Need help?
Do you have a question about the Compact ICS 4.0 and is the answer not in the manual?
Questions and answers