Media Station Rear Panel Connectors And Controls - Avaya E169 Manual

Initial setup and connectivity
Apple Lightning, Apple 30-pin, and generic micro USB cables
(packaged with the docking cradles and handset cradle)
Note:
The Apple 30-pin cable is incompatible with Android devices. You
must provide your own Android 30-pin cable.
Cable sleeves for the Apple Lightning, Apple 30-pin, and generic micro
USB cables (packaged with the USB cables and handset cradle)
Note:
Some Android 30-pin cables might not fit in the cable sleeve. In
this case, connect your cable to the back of the media station and
set your smart device on your desk.
Docking cradles for the Apple Lightning, Apple 30-pin, and generic
micro USB cables (packaged with the USB cables and handset cradle)
Tablet bracket
2. Remove any transparent protective film or packing materials from the parts.

Media station rear panel connectors and controls

Icon
Installing and Maintaining the Avaya E169 IP Media Station
30
Name Description
AC Power Input The connector where you connect the AC power adapter.
USB Connector (2) The connectors where you connect USB devices.
Computer Ethernet The Ethernet connector where you connect a computer.
Port
Ethernet Port The connector where you connect the media station to the
network.
Headset The connector where you connect a headset. Not supported in
Release 1.0.
Comments? infodev@avaya.com
June 2014