Shut Down And Power Off The Sparcstation; Opening The Workstation; Sparcstations 1+ And 2 - Tech Source GXTRA Series Hardware Installation

Chapter 2 - Unpacking and Installing the GXTRA Card

2.3 Shut Down and Power Off the SPARCstation

Ensure that all users save their work and log off before the
workstation is shut down.
Shut down the workstation by entering the following commands:
prompt% /bin/su
password:enter root password if required
prompt# /etc/halt
The screen should display the message:
Syncing file systems ... done
Halted
Type b(boot), c(continue), n(new command mode)
>
Turn the power off in the following order:
1. Monitor
2. External drives and peripherals
3. SPARC system unit

2.4 Opening the Workstation

Reference the documentation provided with your workstation for
specific instructions. General information for a SPARCstation 1+,
2, IPC, IPX and SPARCclassic follow.

2.4.1 SPARCstations 1+ and 2

1. Place the workstation system on a stable flat surface with
enough room to place both top and bottom on the surface.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2-3