Unpacking And Installing The Gxtra Card; Unpackaging And Handling - Tech Source GXTRA Series Hardware Installation

Unpacking and Installing the

2.1 Unpackaging and Handling

The GXTRA card is delivered in a protective box. The box contains
the GXTRA SBus card wrapped in an anti-static envelope, a one-
time use electrostatic discharge (ESD) protection kit, appropriate
software, cable(s), and documentation (depending on the
configuration ordered).
DO NOT INSTALL THE GXTRA UNTIL THIS ENTIRE
CHAPTER HAS BEEN READ.
Always wear the wrist grounding strap (or one-time use
ESD kit as supplied with the GXTRA) while working on
electrical components. This component is vulnerable to
damage from electrostatic shock.
1. Open the box. Remove the card which is in an anti-static
envelope and the ESD kit. We recommend that you save
the box and packing material for future use.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 2
GXTRA Card
NOTE
WARNING
2-1