46/123
Bosch Rexroth AG
Assembly
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
1
Internal gear pump PGH5
1.1
ISO4017-M16X40-8.8 (tightening torque 210 Nm)
1.2
ISO7090-16-200HV
1.3
DIN580-M10
2
Adapter flange
3
Pump foot
3.1, 3.3
ISO7090-16-200HV
3.2
ISO4762-M16X70-8.8 (tightening torque 210 Nm)
3.4
ISO4032-M16-8
4
Synchronous motor MSK133
4.1
ISO7090-16-200HV
4.2
ISO4762-M16X40-8.8 (tightening torque 210 Nm)
4.3
DIN580-M12
Fig.7-5:
Assemble the motor-pump unit MPA01 composed of components
The figure shows the assembly of motors in design "SA" (air cooling). The as‐
sembly of motors in design "FN" (liquid cooling) is identically.
1. Mount the adapter flange
This mounting step is not necessary in design without adapter flange
(2).
DOK-SYTROX-MPA01******-IT02-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPA01