Table of Contents
Advertisement
DOK-SYTROX-MPA01******-IT02-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPA01
14
Environmental Protection and Disposal
Recycling
Significant components
Demagnetize magnets
Packaging
Hydraulic Fluid
Batteries and Accumulators
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
The disposal of the components can be done in the normal recycling process
under consideration of the respective valid national regulations.
Most of the products can be recycled due to their high content of metal. In
order to recycle the metal in the best possible way, the products must be dis‐
assembled into individual assemblies. Metals contained in electric and elec‐
tronic assemblies can also be recycled by means of special separation pro‐
cesses.
Basically, the components consist of the following components:
●
Steel, aluminum, cupper, brass
●
Plastics, insulating and composite material
●
Electronic components
●
Permanent magnets
Plastic parts of the products may contain flame retardants. These plastic
parts are labeled according to EN ISO 1043. They have to be recycled sepa‐
rately or disposed of according to the applicable legal provisions.
WARNING
Health hazard for persons with heart pacemakers, metallic
implants and hearing aids in direct environment of permanent
magnets.
Crushing hazard of fingers and hand due to heavy attrac‐
tive forces of the magnets.
Risk of destruction of sensitive parts such as watches,
credit cards, ... .
The permanent magnets on the rotor must be demagnetized be‐
fore disposal to avoid injuries or damage.
The demagnetization of the magnets on the rotor is reached via a special
thermal handling. The handling duration is influenced by the frame size of the
rotor. The rotor must remain for 30 minutes in the oven, starting at the time,
the magnetic surface has reached 300 °C. If the magnets are surrounded by
a bandage, we recommend to remove them before heating-up the rotor in an
oven to unfold the magnets.
In the case of successful demagnetization, the magnets can be
separated from the rotor sleeves after cooling of the rotor without
any effort.
Out packaging materials do not contain any problematic materials and can be
recycled without any problems. The following are suitable as packaging ma‐
terials: wood, cardboard and polystyrene.
Dispose of the hydraulic fluid according to the respectively valid safety data
sheets for this hydraulic fluids.
Batteries and accumulators can be labeled with this symbol.
The symbol indicating "separate collection" for all batteries
and accumulators is the crossed-out wheeled bin.
Bosch Rexroth AG
Environmental Protection and Disposal
Danger due to permanent magnets!
81/123
Advertisement
Table of Contents
