Table of Contents
Advertisement
78/123
Bosch Rexroth AG
Maintenance and Repair
12.3
Service Repair and Spare Parts
Preparing information
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Repairs on the motor-pump unit or their components may only be performed
by the manufacturer or their authorized dealers and subsidiaries. We do not
provide any guarantee for self-made maintenance! Authorized dealers and
subsidiaries are available for performing repairs at their facilities.
Wearing parts are reliably and professionally repaired and replaced by the
Bosch Rexroth Service in shopfloor-oriented quality.
The service lives of motor components, such as seals and bearings, may
vary depending on the operating conditions, such as operation mode, speed,
vibration and shock load, and frequent reverse mode.
We recommend to change the bearing after 30,000 operating hours. Shorter
replacement intervals may be necessary; cf. checks during operation .
We recommend regular visual inspections on shaft sealing rings. Depending
on operating conditions, signs of wear may appear after 5,000 operating
hours. If necessary, replace the shaft sealing rings.
We recommend to have these repairs made by Bosch Rexroth
Service.
The Bosch Rexroth service helpdesk at our headquarters in Lohr, Germany
and our worldwide service provide You can contact us 24/7.
Phone:
+49 (0) 9352 40 50 60
Fax
+49 (0) 9352 18 49 41
Email:
service.svc@boschrexroth.de
Internet:
http://www.boschrexroth.com
For quick and efficient help, please have the following information ready:
●
Detailed description of the fault and the circumstances
●
Information on the rating plate of the products in question, particularly
type codes and serial numbers
●
Your contact data (phone number, fax number, e-mail address)
DOK-SYTROX-MPA01******-IT02-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPA01
Advertisement
Table of Contents
