Table of Contents
Advertisement
DOK-SYTROX-MPA01******-IT02-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPA01
12
Maintenance and Repair
12.1
Safety / General
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Maintenance and repair of motor-pump units require basics in mechanic, hy‐
draulic and electric.
●
Maintenance and repair of motor-pump units must be carried out by skil‐
led personnel only.
WARNING
Work required on the electric system may only be carried out by skilled elec‐
tricians. Tools for electricians (VDE tools) are absolutely necessary.
Prior to commencing work:
1. Isolate (even auxiliary circuits).
2. Protect the system or plant against restart.
3. Ensure de-energization.
4. Ground and short-circuit.
5. Cover or shield any adjacent live parts.
Before starting to work, check with an appropriate measuring device whether
parts of the system are still under residual voltage (e.g. caused by capacitors,
etc.). If yes, wait until these parts have discharged.
WARNING
Do not carry out any maintenance measures, while the ma‐
chine is running.
While carrying out maintenance work, secure the machine
such that it cannot restart or be used by unauthorized per‐
sons.
CAUTION
Let the motor cool down, before maintenance.
Use safety gloves.
Do not work on hot surfaces.
NOTICE
A safe function of the system can no longer be ensured.
●
During all work on the hydraulic system, pay attention to extreme clean‐
liness.
●
Do not use a high-pressure cleaner.
●
Ensure a correct assembly of the motor-pump unit by qualified person‐
nel before you take the motor-pump unit into operation.
Bosch Rexroth AG
Maintenance and Repair
Danger! Electric voltage! Operations in the vi‐
cinity of live parts are extremely dangerous.
Maintenance work during ongoing operation
may result in personal injury and material
damage!
Hot surfaces with temperatures over 70 °C
may cause burns!
Penetrating dirt and liquid leads to malfunc‐
tion!
75/123
Advertisement
Table of Contents
