Operator Pages And Menus; Process Display - ABB Endura ACA592 Operating Instructions Manual

Endura ACA592
4-electrode conductivity transmitter

7 Operator Pages and Menus

7.1 Process Display

At power-up (if startup is successful) the startup screen is displayed momentarily after approximately 3
seconds. The display is then blank for the next 6 seconds (while the transmitter performs a self-check).
Next the startup screen is displayed again, followed by the Operator Page. This is the normal operating
state of the transmitter.
Access to the Operator Menu and the main menus (used for additional monitoring and configuration) is via
an Operator Page – see Fig. 7.1. Operator Page 1 displays information in a single line, Operator Pages 2 to
4 display information in multi-line formats – see Section 7.1.1, page 47.
Operator Menu
Operator Menu
Diagnostics
Operator Page 1
Operator Page 2
Operator Page 3
Operator Page 4
Autoscroll
Back
The Operator Menu is used:

to select a
Operator Page (1, 2, 3
or 4) as the default
display

to select Autoscroll
mode (autoscroll each
Operator page
sequence every 15
seconds)

to view current alarms
(via the Diagnostics
menu),
Fig. 7.1 Screen Navigation
46
Operator Page
2
ACA592XX
Primary Val
Select
Configuration
1
single
Operator Page Icons
Autoscroll*
The Autoscroll
when Autoscroll is enabled (selected
at the Operator Menu – see Section
in
7.1.1, page 47).
Locked (Menu Access Denied)
A Locked
access to the menus is denied to the
current user due to a time-out or
attempting to enter an incorrect
password.
*If an operational error is displayed,
the Autoscroll and Locked icons are
obscured (until the error is cleared).
X.X
%
icon is displayed
icon is displayed when
7 Operator Pages and Menus
Access Level
Access Level
Read Only
Standard
Advanced
Service
Back
The Access Level is used to
select access to configuration
menus at Read Only, Standard,
Advanced and Service levels.
To access these menus, scroll
to the required level and press
. If a password has been
enabled the Enter Password
screen is displayed – see Section
5.2, page 40.
OI/ACA592/EC–EN Rev. B
Select