Wall-Mounting - ABB AWT420 Operating Instruction

AW T4 2 0 | U N I V E R S A L 4 - W I R E , D U A L- I N P U T T R A N S M I T T E R | O I/A W T4 2 0 - E N R E V. B

Wall-mounting

Dimensions in mm (in)
NOTICE
If the optional weathershield
the transmitter and wall and pass 2 screws
fixing holes (both sides) in weathershield.
Referring to Figure 5:
1 Position the left- and right-hand mounting brackets
the recesses on the rear of the transmitter as shown and
secure with the bracket securing screws. Ensure the plastic
washers remain in the positions fitted.
2 Mark fixing centers
B and drill suitable holes in the wall.
3 Secure the transmitter to the wall using 2 screws
each mounting bracket.
D is used, position it between
C through
A
C in
into
Figure 5 Wall-mounting the transmitter
A
Left hand bracket only shown –
right hand bracket omitted
for clarity
B
152 (5.98)
Optional
weathershield
9
62
(2.44)