ABB AWT420 Operating Instruction page 40

40 AW T4 2 0 | U N I V E R S A L 4 - W I R E , D U A L- I N P U T T R A N S M I T T E R | O I/A W T4 2 0 - E N R E V. B
... 13 Configuration (Advanced access level)
... Display
Menu
Comment
Date & Time Select to set the transmitter's date, local time and daylight saving start/end times:
Date Format Select the date format required:
• DD–MM–YYYY/MM–DD–YYYY/YYYY–MM–DD.
Date & Time Set the date in the format selected at Date Format above and the time in the fixed format:
• HR:MINS:SEC.
Daylight Saving
Select to set the daylight saving parameters.
DS Region
Select the geographical region to base the daylight saving hours on:
• Off – select to disable daylight saving.
• Europe – select to set European-standard daylight saving start and end times automatically.
• USA – select to set USA-standard daylight saving start and end times automatically.
• Custom – select to set daylight saving start and end times manually for regions other
than Europe or USA.
Note. The DS Start Time/Occurrence/Day/Month and Time menus (below) are displayed only
when Custom is selected.
DS Start Hour
Set the daylight saving start hour in 1-hour increments.
DS Start Occurrence Select the day within the month to start daylight saving.
For example, to set daylight saving to start on the second
Sunday of the selected month, select Second..
DS Start Day Select the day of the month on which daylight saving is to start.
Note. The DS Start Occurrence parameter must be valid within the
month for the selected day.
DS Start Month Select the month on which daylight saving is to start.
Note. The DS Start Occurrence parameter must be valid within the
month for the selected day.
DS End Hour Set the daylight saving end time in1-hour increments.
DS End Occurrence Select the day within the month to end daylight saving.
For example, to set daylight saving to end on the second
Sunday of the selected month, select Second.
DS End Day
Select the day of the month on which daylight saving is to end.
Note. The DS End Occurrence parameter must be valid within the
month for the selected day.
DS End Month
Select the day of the month on which daylight saving is to end.
Note. The DS End Occurrence parameter must be valid within the
month for the selected day.
Brightness Sets the display brightness.
Default
YYYY-MM-DD
Off
1
2
Last
Last
Sunday
Sunday
Sunday
Sunday
1
2
Last
Last
Sunday
Sunday
Sunday
Sunday