Media Card - ABB AWT420 Operating Instruction

4 4 AW T4 2 0 | U N I V E R S A L 4 - W I R E , D U A L- I N P U T T R A N S M I T T E R | O I/A W T4 2 0 - E N R E V. B
... 13 Configuration (Advanced access level)

Media Card

Menu
Media Card
Exit Select
Menu
Comment
Data Logging
Channel 1 (to 6) Select the source of the data to be logged – see page <?> for sources.
Sampling Time Select the sampling duration time:
• 5/10/30 seconds
• 1/5/10/30 minutes
• 1 hour
Note . The following menus are displayed only if an SD card is inserted and has been placed online.
Save Configuration
Select File
Config1 (to 8) Select a position in which to create and save a configuration file containing user-defined sensor
parameters to external media.
Up to 8 files can be created. If a file exists in a position, it is displayed as Config1(Overwrite).
Either overwrite the existing file or select a new position in which to save it.
Note. Wait until the progress bar is complete and the OK soft key prompt reappears before pressing
the
configuration file.
Load Configuration
Select File
Config1 (to 8) Select a position from which to load a configuration file containing user-defined sensor parameters
from external media. The most recently saved file is displayed.
Press the
Only positions containing configuration files are displayed.
Format Card
Press the
Note. Formatting erases all data currently on the SD card.
Used to enable/disable data logging, select the source of the data to be logged,
save and load configuration files and to format external media.
key. Pressing during a save operation cancels it prematurely resulting in an unusable
key to display a list of other positions containing configuration files.
key (Yes) to format the SD card if required.
Default
5 s