Table of Contents
Advertisement
i910-411
www.powercommander.com
11
Install the PCIII on top of the
stock ECU (Fig. G) using the
supplied velcro.
Make sure to use the supplied
alcohol swab to clean both sur-
faces before attaching.
12
Zip tie the grey wire from the
PCIII to the frame.
13
Make sure all wires are routed
so that they will not get pinched.
14
Reinstall the side cover, front
cover, and front fender rack.
2004 Polaris Sportsman 700 PCIII USB - 4
Advertisement
Table of Contents
Need help?
Do you have a question about the Power Commander III and is the answer not in the manual?
Questions and answers