Table of Contents
Advertisement
Remove this cover
i910-411
www.powercommander.com
Unplug these connectors
Stock connectors
PCIII connectors
1
Remove the front fender rack.
2
Remove the center cover
(Fig. A).
3
Remove the right hand side
cover (by the shift lever).
4
Unplug the two connectors from
the fuel injectors (Fig.B). These
connectors are near the ECU.
One connector has a WHITE
wire and a RED/BLACK wire.
The other connector has a
WHITE/BLACK wire and a
RED/BLACK wire.
5
Lay the PCIII in the vacinity of
the ECU temporarily.
6
Plug the black connectors from
the PCIII in-line of the connec-
tors you just unplugged (Fig.C).
2004 Polaris Sportsman 700 PCIII USB - 2
Advertisement
Table of Contents
Need help?
Do you have a question about the Power Commander III and is the answer not in the manual?
Questions and answers