Advertisement
Table of Contents
2003-2004 Suzuki GSXR 1000
Parts List
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
1
Power Adapter
2
Power Commander Decals
2
Dynojet Decals
1
Velcro
Strip
®
1
Alcohol Swab
The ignition MUST be turned
OFF before installation!
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
i315-411
Installation Instructions
Button Adjustment Display
Faceplate Buttons
Expansion Port
USB Port
2003-2004 Suzuki GSXR 1000 - PCIII USB - 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dynojet POWER COMMANDER III
Summary of Contents for Dynojet POWER COMMANDER III
- Page 1 Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com i315-411 2003-2004 Suzuki GSXR 1000 - PCIII USB - 1...
- Page 2 Remove the main seat and the passenger seat. Hold the front of the fuel tank up using the prop rod located in Unplug this connector the trunk area. Locate the connector from the main wiring harness to the injector rail and uplug this connector (Fig.
- Page 3 Install the PCIII in the rear section of the trunk using the supplied velcro (Fig. D). Make sure to clean both surfaces with alcohol first. Make sure all the wires are routed properly. Bolt down the fuel tank. NOTE: When lowering the fuel tank make sure the fuel line does not kink at the frame support.
Need help?
Do you have a question about the POWER COMMANDER III and is the answer not in the manual?
Questions and answers