Replace The Fan Unit - Omron Sysmac NY Series Hardware User Manual

2) Lift the side
3) Remove
The Cover is removed.
To mount the Cover, position the side of the Cover in the Box PC and push the cover in place.
The lever will lock in place.
7-2-2

Replace the Fan Unit

The fans are mounted in the Fan Unit.
Use the following procedure to replace the Fan Unit.
Precautions for Safe Use
If the storage period of the replacement fan exceeds 6 months, check the performance of the
Fan Unit directly after replacement.
Additional Information
Refer to 3-9-2 Fan Unit on page 3-21 for the model.
1
Power OFF the Box PC.
2
Remove the Cover of the Box PC.
Additional Information
Refer to 7-2-1 Remove the Cover on page 7-4 for the cover removal procedure.
3
Disconnect the Fan Connectors from the board.
NY-series Industrial Box PC Machine Controller Hardware User's Manual (W556)
2
to tilt the Cover.
3
the complete Cover.
7 Maintenance
7
7-5