Glazing (Part 1) - Alton Evolution octagonal Instruction Manual

Glazing (part 1)

If you have the optional aluminium bar capping you need to insert
the rubber into the rubber channels and trim it to length (diagram
69). Begin glazing the sides of the building by inserting one of the
narrow panes (EV610x76) next to the louvre frame. If you have the
louvre in the mid level position as below you also need to install
the glass above the louvre (EV795X392).
EV0980
Section
Glazing
Rubber
EV0990M
Section
12
Diagram 68
Diagram 69
Diagram 70
32
Dia. 70
EV795X392
Diagram 67