Alton Evolution octagonal Instruction Manual page 44

Glazing (part 2)
After placing the first pane of glass you can fit the next one
along, once you have 2 panes in place you can fit the first piece
of capping securing both panes with 40mm Pan head screws.
Repeat this around the building until all the roof panes and
capping is in place.
If you haven't already done so you can now install the louvre
glass. Carefully slide each piece into the
glass retainers until it hits the small
stop (diagram 95).
Diagram 94
824mm x 1106mm
x 30mm
EV824X1106X30
Dia. 95
Diagram 95
External
14
44