Alton Evolution octagonal Instruction Manual page 52

Staging Installation
Slide a bolt into each end of
Internal
the last two slats and slot
them into place. Line the
staging support bracket
(EV1124M) up with the bolt
on the 2nd slat in from the
front and attach nuts to
both.
Diagram 118
Diagram 119
Internal
Dia. 120
Make sure all the staging slats are
level before fixing the diagonal
support with a large head 25mm
screw (diagram 120).
When you are happy with the
position of the infill staging
section tighten all of the nuts.
Diagram 120
16
52