Base Preparation - Alton Evolution octagonal Instruction Manual

Hide thumbs Also See for Evolution octagonal:
Table of Contents

Advertisement

Base Preparation

Slab Base Size (Recommended)
Note: The base should always be larger than your
building.
The measurements given in 'A' and 'B' should only
be used as a guide.
Greenhouse
Greenhouse
Width
Length
6'6" - 1989mm 6'6" - 1989mm
It is necessary to leave sufficient working room around your greenhouse when you're putting it up
and also to allow for the possible need to replace a piece of glass in the future. If possible try and
leave a space of 2ft/610mm around the greenhouse.
Locate the greenhouse where there is maximum amount of sunlight and avoid if possible any shade
from trees, fences or other buildings. Over-hanging branches can be a particular nuisance and should
be avoided.
Choose a site where the greenhouse is relatively easy to get to and convenient to bring water to and
possibly a supply of electricity.
Finally, and most importantly, choose a site where your Alton Greenhouse will look right so that it
will complement your garden.
1
A (mm)
B (mm)
2400
2700
Recommended
3' X 2' Slab (2" thick)
(910mm X 610mm)
4
B
5 : 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Evolution octagonal and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Evolution octagonal

Table of Contents