Downpipe Installation - Alton Evolution octagonal Instruction Manual

Downpipe Installation

In the gutter section supplied to take the downpipe
there are two holes, you can decide which hole to use
for the outlet and then simply black the other hole off
with the insert supplied.
Start by adding a small amount of silicone to the
underside of the collar on the outlet (D201), diagram
130. Push the outlet through the hole and attach the
downpipe (D211).
While supporting the downpipe slide the downpipe
clip (EV0740M) on from the bottom of the pipe. Fix
this to the mid rail with a 25mm round head screw
(diagram 131).
When secure fit the downpipe shoe (D207) to the
bottom of the pipe (diagram 132).
Diagram 129
If using a water butt, use the
downpipe shoe as a joint to
divert the pipe into the butt.
18
Dia. 130
Dia. 131
Dia. 132
56
Diagram 130
D201
D211
Diagram 131
Diagram 132
Add silicone here
D211
EV0740M
D211
D207