Insert Battery (Optional) - Dentsply Sirona CEREC Omnicam AC Operating Instructions Manual

Hide thumbs Also See for CEREC Omnicam AC:
Table of Contents

Advertisement

Available languages

Available languages

Dentsply Sirona
Operating Instructions
67 15 499 D3696
D3696.201.02.04.02    09.2019
4.4.3

Insert battery (optional)

CAUTION
Risk of fire or chemical injury
Improper handling of the storage battery used in this unit can lead to
a risk of fire or chemical injury.
➢ Do not dismantle the storage battery, allow it to heat up above
45°C or burn it.
➢ The battery must only be replaced by a spare part provided by the
manufacturer. Use of other storage batteries can lead to a risk of
fire or explosion.
A
Service cover
B
Storage battery
C
2 fastening screws
1. Open the service cover on the back panel.
NOTE
Risk of fault during operation and defects to the system
If the storage battery is not screwed down, faults during operation and
defects to the system may occur.
➢ Always screw the storage battery down tightly.
4 Installation and startup
4.4 Initial startup
D
2 guide rails
E
2 guide pins
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cerec primescan acPrimescan acOmnicam ac

Table of Contents