Base Unit; Terminal Arrangement - Omron K3NX Operation Manual

Base Unit

Mounting Method
2-2

Base Unit

2-2-1 Terminal Arrangement

Signal
input
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
1, 2, 3... 1. Insert the K3NX into the mounting hole on the panel.
2. Hook the fixture claws onto the side holes.
3. Mount a fixing metal to the right and left sides as shown above and while
keeping them in balance, alternately tighten each screw until the ratchet be-
comes idle.
12 VDC, 80 mA
Sensor power supply
Signal Signal
input input
Note Terminals 7 to 13 are connected internally.
Section 2-2
Panel
100 to 240 VAC
12 to 24 VDC
11