Ricoh SP 330DN Field Service Manual page 42

4.Replacement and Adjustment
4. Remove the right cover
5. Remove the four screws and a connector, and release the three hooks, and then remove the top
cover [A].

When re-installing the top cover, always verify that the two paperweights [A] are lifted. If
they are not lifted to fit into the paper slot, the paperweights could be damaged.

Make sure that these paperweights can be moved smoothly (up and down) after installing
the top cover. If these paperweights do not move smoothly, try installing the top cover
again.
30
(Right Cover).