Ricoh SP 330DN Field Service Manual page 29

Center GUI.
Four-line LCD panel: SP menu > [@Remote] > [Remote Service] > [Instl:Ref Section]
Touch panel: SP menu > [@Remote] > [Remote Service] > [Confirm Place]
8.
Execute the registration.
Four-line LCD panel: SP menu > [@Remote] > [Remote Service] > [Instl:Rgstltn]
Touch panel: SP menu > [@Remote] > [Remote Service] > [Register Execute]
9. Check the registration result.
Four-line LCD panel: SP menu > [@Remote] > [Remote Service] > [Instl:Rgstltn Rst]
Touch panel: SP menu > [@Remote] > [Remote Service] > [Register Result]
Value
0 Succeeded
2 Already registered
3 Communication error (proxy enabled)
4 Communication error (proxy disabled)
5 Proxy error (Authentication error)
8 Other error
9 Request number registration executing
After Settings
The first manual call after setting is considered as a test call. Be sure to execute the test call, or the first
manual call from the customer will be considered as the test call.
.
1.
Enter the "Maintenance Mode (SP mode)".
2. Execute the "Manual Call".
Four-line LCD panel: SP menu > [@Remote] > [Remote Service] > [Remote Diagnostics]
Touch panel: SP menu > [@Remote] > [Remote Service] > [Remote Diagnostics]
3.
"Running..." is displayed for about 3 seconds. This message disappears automatically after 3
seconds, and then returns to [Remote Service] menu.
Error Codes
When other errors occur, check the following error code list.
Four-line LCD panel: SP menu > [@Remote] > [Remote Service] > [Instl: ErrorCode]
Touch panel: SP menu > [@Remote] > [Remote Service] > [Error Code]
Caused by Operation Error, Incorrect Setting
Code
-12003 Attempted registration without execution of a
confirmation and no previous registration.
-12004 Attempted setting with illegal entries for
Meaning
Meaning
Solution/ Workaround
-
Check the registration status.
Check the network condition.
Check the network condition.
Check the proxy user name and password.
See "Error Codes" below this.
Processing... Please wait.
Solution/ Workaround
Perform Confirmation before attempting
the Registration.
Check the ID2 of the machine.
2.Installation
17