Ricoh SP 330DN Field Service Manual page 134

5.System Maintenance
Menu
Stop/Clear Key
Off-Hook
Detection
Number for
Remote Switch
Number of time
to press
Period: TEL to
Fax
TX Settings Redial Interval
Redialings
Overseas Overseas
Comm Mode Comm Mode
Settings
Minimum Time
Length
Dial Pulse Dial Pulse Type
Setting
Tone Signal Tone Signal
Settings Transmission T
Minimum Pause
In Tone Dial
Attenuator of
Pseudo Ring
DTMF Level
122
Pressing the Stop/Clear key can stop the current receiving
operation. Received data is lost.
[No Functional (Default)/ Functional]
Sets the Off-Hook detection period.
[200 msec (Default)/ 800 msec]
[0～9 / 2 (Default/ 1digit/step]
[1～3 / 2 (Default/ 1time/step]
[Limitless / 10 sec (Default/ 20 sec / 30 sec / 40 sec]
Sets the redial interval when Tx fails.
[5 Min (Default)/ 6 Min]
Sets the number of redials when Tx fails.
[2 times (Default)/ 3 Times/ 4 Times/ 5 Times]
This sets the machine to ignore a DIS signal sent from the called
station once in a sending operation.
[Off (Default)/ Ignore DIS Once]
If this setting is set to "On", the machine detects the CNG signal
after the line is connected. If it is set to "Off", the machine
detects the CNG signal as long as the line is connected.
[100 Ms/ 200 Ms/ 300 Ms/ 400 Ms (Default)]
This sets the number of pulses that are generated during dialing.

N: Dialing '0' generates 10 pulses --- Dialing '9' generates 9
pulses. (Default)

N+1: Dialing '0' generates 1 pulses --- Dialing '9' generates
10 pulses.

10-N: Dialing '0' generates 10 pulses --- Dialing '9'
generates 1 pulse.
Sets the tone signal transmission time length
[100 ms (Default)]
Sets the minimum pause during tone dialing
[100 ms (Default)/ 150 ms/ 200 ms]
Sets the attenuator for pseudo ringback tone to the line
[0 to 15 / 10 (Default)/ 1 dB/step]
Sets the transmission level of DTMF tones.
[-12 dBu / -11 dBu/ -10 dBu (Default)/ -8 dBu/ -6 dBu]
Description