Ricoh SP 330DN Field Service Manual page 149

Group Item
Subnet Mask
Default
Gateway
Address
DHCP
DNS Method
Primary DNS
Server IP
DNS Domain
Name
Selections
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
On */ Off
Auto */ Manual
xxx.xxx.xxx.xxx
-
5.System Maintenance
Remarks
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
This setting is not available if DHCP is
enabled.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
Will show all zero if network initialization is
not finished. Any change will be ignored
before the end of network initialization.
This setting is not available if DHCP is
enabled.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
Will show all zero if network initialization is
not finished. Any change will be ignored
before the end of network initialization.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
-
Up to 32 alphanumeric characters. This
setting is not available if DHCP is enabled.
The default setting is "0.0.0.0"when DHCP
is off.
The setting when DHCP is changed from
on to off is the previous setting when DHCP
was on.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
Up to 32 alphanumeric characters. This
setting is not available if DHCP is enabled.
The default setting when DHCP is off is null
string.
The setting when DHCP is changed from
137