Table of Contents
Advertisement
Display values
Setting
Display values
46/232
Building Technologies
HVAC Products
3.7
Completing commissioning
If the application is correct, the Commissioning menu can be quit as follows:
1.
Press the ESC button. The display shows a dialog box with the following information:
Caution!
Plant starts
ESC
2.
Confirm by pressing the OK knob. Then, the controller starts using the settings
made; the plant is started up, and the Main menu appears on the display.
Main menu
Commissioning...
Boiler sequence manager...
Boiler 1...
Boiler 2 ...
3.8
Data backup
When commissioning is completed, the entire commissioning data set (configuration
and all settings) can be stored in the controller. If any time later, an unauthorized
person readjusts important values, this function can be used to restore the proper
controlled state after commissioning.
Main menu > Data backup
Operating line
Storage date
Storage year
Main menu > Data backup
Operating line
Restore
Save
3.9
Device information
On the Device information menu, information about the controller, such as the software
version, can be viewed.
Main menu > Device information > Controller
Operating line
Plant type
Plant type adapted
File name
Device type
Software version
Hardware version
Boiler Sequence Controller RMK770
3 Commissioning
OK
Remarks
Display of the date on which the commis-
sioning data set was downloaded to the
controller's memory
Display of the year in which the commission-
ing date set was downloaded to the control-
ler's memory
Remarks
Caution! New configuration
Caution! Stored data will be overwritten.
Remarks
Display of plant type
Display of an intervention made in the
programmed application (yes, no)
Has a function only in connection with
ACS7... Display of file name of the applica-
tion currently loaded
Can be edited under Settings > Texts.
RMK770-...
Display of software version
Display of hardware version
CE1P3132en
23.04.2009
Advertisement
Table of Contents
