System Status - Electro-Voice EVOLVE Installation Manual

EVOLVE Portable Column Loudspeaker
5.2

System status

Normal
1
Figure 5.1: Normal system status home screen with Bluetooth® status
1.
2.
3.
4.
5.
6.
7.
8.
Notice!
Bluetooth® is available in select countries.
Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.
System protection
System protection limiters indicate when a system is exceeding recommended usage by
indicating CLIP or LIMIT on the LCD display.
CLIP
CLIP indicates the signal to the loudspeaker is too high, resulting in a clipped signal into the
loudspeaker. If CLIP is shown, reduce the input gain knob and/or the signal on the mixer or
source equipment.
Electro-Voice
2
LEVEL – Indicates the master gain of the system in dB. The range is from mute to +10 dB,
in 1 dB increments.
1, 2, 3, 4, 5-6, 7-8 - VU meter displays the signal level of INPUT1 through 7/8 into the
amplifier. Input levels are independent of each other.
AUX - VU meter displays the signal level of the AUX output. AUX level is independent of
INPUT and MAIN levels.
MAIN - VU meter displays the signal level of the MAIN output. MAIN level is independent of
INPUT and AUX levels.
C - Control app; the available options are:
OFF - DISABLED
FLASHING - PAIRING MODE
SOLID - CONNECTED
1 - Indicates the selected store function number. There are five user defined store
function numbers available.
E - Indicates the preset is not saved. When the preset is saved the E is not displayed.
S - Audio streaming; the available options are:
OFF - DISABLED
FLASHING - PAIRING MODE (120s)
SOLID - CONNECTED
5
3
Installation manual
Amplifier DSP | en
6 7
8
4
17
2019-08 | 01 |