Electro-Voice EVID 3.2 Owner's Manual

Electro-Voice EVID 3.2 Owner's Manual

Hide thumbs Also See for EVID 3.2:

Advertisement

Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVID 3.2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Electro-Voice EVID 3.2

  • Page 1 Owner's Manual...
  • Page 2: Table Of Contents

    Table of Contents Table of Contents ....ii Safety Agency Compliance ..10 Product Description ....1 Maintenance .
  • Page 3: Product Description

    Product Description Welcome Important Features • Thank you for purchasing EVID™ Series Line-array enhanced coverage control • loudspeakers. Read through this manual to Organic, unobtrusive shape • familiarize yourself with the features, SAM™ (Strong-Arm-Mount™) system applications, and precautions before you for secure and reliable mounting •...
  • Page 4: Model Summary

    Product Description Model Summary Packing List (3.2, 4.2, 6.2) Listed and illustrated below are the parts in- EVID™ 3.2 cluded in each boxed pair of EVID™ speakers. Most compact of the EVID™ Series, the EVID™ 3.2 uses dual 3.5-inch LF drivers Figure Quantity Part with a .75-inch titanium direct radiator...
  • Page 5: Evid™ Product Family

    Product Description EVID™ Product Family Product Feature Identification Illustrated below are the major components 8-Ohm Impedance of the EVID™ Series full-range speakers. Part Number Model Description 301045-001 Dual 3.5" full range A. Shielded dual woofers B. Coherent Coverage Waveguide horn shielded (black) (4.2 and 6.2 only) C.
  • Page 6: Sam™ (Strong-Arm-Mount™)

    Product Description SAM™ (Strong-Arm-Mount™) Step-by-Step Installation System and Wiring (3.2, 4.2, 6.2) EVID™’s SAM™ system (Strong-Arm- Step 1: Mount the SAM™ Bracket Mount™) excels at meeting the four require- The SAM™ bracket can be mounted on ments for mounting FGM/BGM systems: either side of the speaker, enabling optimal simple, quick, versatile, and reliable.
  • Page 7: Step 2: Select Voltage Tap (Models 4.2T And 6.2T Only)

    Product Description Step 2: Select Voltage Tap (Models Step 3: Mount the Speaker to the 4.2t and 6.2t Only) SAM™ Bracket Before mounting the speaker to the brack- Attach the speaker to the SAM™ bracket et, select the proper voltage tap setting for with the socket head bolt, as shown in your installation.
  • Page 8: Step 4: Wire The Speaker

    Product Description Attach both logo caps as shown in Figure 11 after tightening and securing the speaker. EV logo cap EV logo cap (large) (small) Connect seismic security cable Figure 12: Secure seismic security cable Step 6: Test System Operation Figure 11: Attach logo caps After all connections are made, test the complete system operation.
  • Page 9: Packing List (12.1 Subwoofer)

    Product Description Packing List (12.1 Subwoofer) Product Feature Identification Below is the list of parts included with the The 12.1 subwoofer comes with a dual-mode EVID™ 12.1 subwoofer. The parts are illus- mounting bracket that enables the unit to trated in Figure 14. be easily mounted at either a wall/wall (cor- ner) or on a wall/ceiling (midwall) junction.
  • Page 10: Step-By-Step Installation And Wiring (12.1 Subwoofer)

    Product Description Step-by-Step Installation Step 2: Install the Safety Line Using accepted safe rigging practices, and Wiring (12.1 Subwoofer) secure one end of a suitable safety line (use cable, not chain, which will rattle) to a Step 1: Mount the Bracket strong, secure point above the speaker, a The mounting bracket can be installed two point that can withstand the shock of the...
  • Page 11: Step 4: Mount The Speaker To The Bracket

    Product Description enclosure hangs from the top clip, always from install the lower one to secure against possi- amplifier ble disengagement of the top clip. Straighten ® the EV logo and press firmly at its center to seat it securely into its mounting hole. –...
  • Page 12: Step 5: Test System Operation

    Product Description cross-tees. This stabilizes the enclosure from rocking. Trim the ceiling panel to fit the new opening(s) and drop into place. It is the installer's responsibility to assure that the Rungs chosen rigging points are strong enough to support the load. Warning: Never try to install this speaker in a suspended ceil- ing without proper rigging support! Floor Mounting...
  • Page 13: Uniform Limited Warranty

    Uniform Limited Warranty Electro-Voice ® products are guaranteed Incidental and Consequential against malfunction due to defects in mate- Damages Excluded rials or workmanship for a specified period, Product repair or replacement and return as noted in the individual product-line to the customer are the only remedies pro- statement(s) below, or in the individual vided to the customer.
  • Page 14: Integrating The 12.1 Subwoofer

    Appendix A: Integrating the Subwoofer system impedance to be determined by the Installation Examples number of satellites per channel. The EVID™ Series is a product family with the flexibility to fit the requirements of Using a Separate Amplifier many different applications. Listed below Channel for the 12.1 are some suggested combinations for sys- In certain specialized applications, it may be...
  • Page 15: Appendix B: Painting The Speaker

    Appendix B: Painting the EVID™ Speakers The 12.1 subwoofer is a painted wood these agents may cause permanent enclosure which can easily be repainted. damage to the enclosure. • After cleaning, apply two or more two Painting Process thin coats of either latex or oil-based (3.2, 4.2, 6.2) paint.
  • Page 16: Appendix C: Troubleshooting Table

    Appendix C: Troubleshooting Table Problem Possible Cause(s) Action 1. No sound Amplifier Connect a known working test speaker to the amplifier outputs. If there is no sound, check that all the elec- tronics are on, the signal routing is correct, the source is active, the volume is turned up, and so on.
  • Page 17: Technical Specifications

    Appendix D: Technical Specifications Specification 3.2/3.2t 4.2/4.2t Frequency Response 1 85-20kHz 65 Hz-20 kHz (-10 dB) Power Handling 2 150 watts 200 watts Sensitivity 3 87 dB, 1 W/1 m 90 dB, 1 W/1 m Impedance 8 ohms 8 ohms Max SPL 104 dB 111 dB...
  • Page 18: 6.2T; 12.1

    Appendix D: Technical Specifications Specification 6.2/6.2t 12.1 Frequency Response 1 62 Hz-20 kHz 40 Hz-140 kHz (-10 dB) Power Handling 2 300 watts 175/175 watts Sensitivity 3 95 dB, 1 W/1 m 100 dB, 1 W/1 m Impedance 8 ohms 8 ohms Max SPL 116 dB...
  • Page 19 Notes EVid Owner’s Manual...
  • Page 20 • Telex Communications, Inc. • www.telex.com © Telex Communications, Inc. 03/2001 Part Number 38109-899 Rev A...

Table of Contents