Electro-Voice EVOLVE Installation Manual page 21

Portable column loudspeaker
Hide thumbs Also See for EVOLVE:
Table of Contents

Advertisement

EVOLVE Portable Column Loudspeaker
The default is ON.
LCD DIM Menu
The LCD Dim menu is used to dim the display when the display is idle for 30 seconds.
Available options for this selection are: ON or OFF.
The default is ON.
BRIGHT Menu
The Bright menu is used to determine the brightness of the LCD.
The range is 1 to 10.
The default is five (5).
CONTRAST menu
The Contrast menu is used to increase or decrease the visibility of the LCD screen.
The range is 1 to 10.
The default is five.
STORE Menu
The Store menu allows you create up to five customized user settings. Available options for
this selection are: EXIT, 1, 2, 3, 4, and 5.
Notice!
The customized user setting name can contain a combination of alphanumeric characters
including spaces. The alphanumeric character range is A to Z and 0-9.
The name field length is 12 characters.
Storing customized user settings
To store customized user settings, do the following:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Select EXIT to return to the home screen.
RECALL Menu
The Recall menu allows you retrieve up to five customized user settings. Available options for
this selection are: EXIT, 1, 2, 3, 4, and 5.
Recalling customized user settings
To recall customized user settings, do the following:
1.
2.
3.
4.
Electro-Voice
From the DSP menu, scroll to STORE.
Push the MASTER VOL knob to select STORE.
The store screen appears.
Push the MASTER VOL knob to select 1.
The Enter name for 1 screen appears.
Use the MASTER VOL knob to scroll through the characters.
The characters appear.
Push the MASTER VOL knob to select the desired character.
Turn the MASTER VOL knob to move to the next character entry.
Continue selecting characters until the desired name is entered.
Use the MASTER VOL knob to scroll to SAVE.
Push the MASTER VOL knob to select SAVE.
Repeat steps 3 through 8 to store additional customized user settings.
From the DSP menu, scroll to RECALL.
Push the MASTER VOL knob to select RECALL.
The recall screen appears.
Push the MASTER VOL knob to select 1.
The selected item is loaded.
Select EXIT to return to the home screen.
Installation manual
Amplifier DSP | en
21
2019-08 | 01 |

Advertisement

Table of Contents
loading

Table of Contents