Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electro-Voice Premium Surface Mount Speakers
Summary of Contents for Electro-Voice Premium Surface Mount Speakers
-
Page 1: Evid Design And Installation Reference Guide
EVID Design and Installation Reference Guide Premium Surface Mount Speakers... -
Page 2: Table Of Contents
What finishes are the EVID models available in? ... 5 Can I get replacement logo and brackets for the EVID speakers?... 5 The installation requires no logo is visible on the speaker. What can I do?... 5 Can I use the EVID 12.1 outdoors? ... 5 Can I paint the EVID 12.1? ... - Page 3 Low Temperature... 8 IEC Water Splashing... 8 What are the characteristics of the matching transformers in the EVID models? ... 8 In what application would I use the “t” versions rather than the 8 Ohm models?... 8 Do the EVID “t” models work with both 70v and 100v systems? ... 9 What are the power taps for the various EVID “t”...
-
Page 4: Mounting Questions
“T” channel and provides a stud to attach the bracket mounting plate. We recommend using 2 per speaker. Make sure and position the clips near or directly beneath the grid support wires to guard against a sagging ceiling. EV does not stock these adapters, but they are available from a variety of lighting and hardware suppliers. -
Page 5: System Design Questions
Yes, you can order spare logos, brackets and related items as service parts. Please reference the spare parts price list for further information. The installation requires no logo is visible on the speaker. What can I do? In this situation it is easy to “black or “white out” the logo so that is becomes nearly impossible to see. -
Page 6: What General Guidelines Do I Consider When Deciding On The Physical Placement Of The Evid 12.1 Subwoofer
What general guidelines do I consider when deciding on the physical placement of the EVID 12.1 subwoofer? It is often desirable to place the subwoofer in the middle of the room to get the most uniform coverage. Even though a subwoofer projects sound omni directionally and that the sound is generally not localizable, there is still a reduction in subwoofer sound level the farther away one gets from the subwoofers installed location. -
Page 7: What Are Some Techniques To Properly Balance The Levels Between The Subwoofer And Satellites
In mono systems (with the inputs of the subwoofer paralleled), the amp views the loads hooked up to the Left and Right satellite outputs as being in parallel with each other. Make sure the amplifier can run loads of less than 4 ohms in this situation. What are some techniques to properly balance the levels between the subwoofer and satellites? The required sensitivity balance between the subwoofer and satellites varies by the... -
Page 8: Salt Spray
In addition, the insertion loss of less than 0.5 db is extremely low. This results in less heat generation, higher power transfer and more speaker efficiency. In what application would I use the “t” versions rather than the 8... -
Page 9: Do The Evid "T" Models Work With Both 70V And 100V Systems
70.7v only. A rotary switch on the back panel selects the taps for the 4.2t and 6.2t. A label is provided on the back of each speaker showing the switch positions to use for the settings at 70v and 100v. -
Page 10: Evid System Design Examples
What are some typical systems designs incorporating EVID series speakers? The EVID series of surface mount speaker systems are especially well suited to working with the MA/MR mixer amps or the CPS-1, CPS-2 and CPS2T power amplifiers. Listed below are a number of suggested installation examples for a variety of environments incorporating EV amplification products. -
Page 11: Small Bar Or Restaurant
Small Bar or Restaurant Room size: 2500 Sq Ft. Source: Mid level music Equipment List Item Quantity Speakers Main – Full Range Subwoofer Amplification Power Amplifier Doctors Office Room size: 300 Sq Ft. Source: Low level programmed music & voice paging Equipment List Item Quantity... -
Page 12: Theatre Lobby
Theatre Lobby Room size: 3000 Sq Ft. Source: Low level music & voice paging Equipment List Item Quantity Speakers Main – Full Range Subwoofer Amplification Mixer/Amplifier Sports Bar Room size: 4000 Sq Ft. Source: High level music Equipment List Quantity Speakers Main –... -
Page 13: Stadium
Stadium Total area: 100000 Sq Ft. Source: Announcement fill and voice paging Total amplifier power: 580 watts per channel The 6.2t’s are tapped at the 30w setting Equipment List Item Quantity Speakers Main – Full Range Subwoofer Amplification Power Amplifier Mixer/Amplifier CPS2T CPS2T...