Electro-Voice EVOLVE Installation Manual page 22

Portable column loudspeaker
Hide thumbs Also See for EVOLVE:
Table of Contents

Advertisement

22
en | Amplifier DSP
BLUETOOTH
The Bluetooth menu options are CONTROL APP and STREAMING.
CONTROL APP menu
The Control App menu is used to enable the QuickSmart Mobile wireless control and
monitoring application. Available options for this selection are: ON or OFF.
The default is OFF.
Notice!
Bluetooth® is available in select countries.
Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Bosch Security Systems, Inc. is under license. Other trademarks
and trade names are those of their respective owners.
Turning Bluetooth® ON or OFF
To turn Bluetooth® ON or OFF, do the following:
1.
2.
STREAMING
The Streaming menu is used to stream audio from your Bluetooth® enabled device to the
loudspeaker system. Available options for this selection are: PAIRING, ON or OFF.
The default is OFF.
Pairing the portable column system with your Bluetooth® enabled device
To pair the portable column system with your Bluetooth® enabled device, do the following:
1.
2.
3.
Notice!
If connected with a mobile device, notification alerts and ring tones will also be played
through the system.
Disable these notifications or enable Airplane mode on your mobile device to prevent
unwanted interruptions during audio playback.
Turning streaming ON or OFF
To turn streaming ON or OFF, do the following:
1.
2.
RESET menu
The Reset menu is used to reset the loudspeaker to original factory settings. Available options
for this selection are: NO or YES.
The default is NO.
2019-08 | 01 |
From the DSP menu, scroll to CONTROL APP.
Select ON.
OR
Select OFF.
From the DSP menu, scroll to STREAMING.
Select PAIRING.
PAIRING mode enables 120 seconds of visibility to Bluetooth® enabled devices.
On your mobile device, select EV EVOLVE to initiate the pairing process.
Once the device is paired, all device audio will be output through the EVOLVE 50 system.
From the DSP menu, scroll to STREAMING.
Select ON.
OR
Select OFF.
Installation manual
EVOLVE Portable Column Loudspeaker
Electro-Voice

Advertisement

Table of Contents
loading

Table of Contents